JL Audio RD1000/1 : Mono 1000W/600W Amplifier @ 2Ω/4Ω

JL Audio RD1000/1 : Mono 1000W/600W Amplifier @ 2Ω/4ΩRD Series 1000 Watt Monoblock Subwoofer Amplifier @ 2 Ohms. Purpose built for subwoofer applications, the RD1000 1 monoblock amplifier delivers 1000 watts of jaw dropping bass output into 2 ohms (14. 4V, 1% THD). At the heart of this ultra sleek and compact power plant is JL Audios exclusive NexD Class D technology, permitting high power output with exceptional efficiency and low distortion. For your convenience, all of the RD1000 1s controls are

RD-Series 1000-Watt Monoblock Subwoofer Amplifier @ 2-Ohms.

Purpose-built for subwoofer applications, the RD1000/1 monoblock amplifier delivers 1000 watts of jaw-dropping bass output into 2 ohms (14.4V, 1% THD). At the heart of this ultra-sleek and compact power plant is JL Audio’s exclusive NexD™ Class D technology, permitting high power output with exceptional efficiency and low distortion.

For your convenience, all of the RD1000/1’s controls are located on top of the amplifier, beneath a protective cover, with all connections found along one side of its chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balance inputs are also onboard, capable of accepting most input voltage levels. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.

The RD1000/1 is also equipped with an onboard LED-clipping indicator. This all-new, innovative feature lets you easily set your amplifier’s input sensitivity setting, quickly and accurately, with no special equipment needed. The RD1000/1 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition. Control of the subwoofer level from the driver’s seat is easily accomplished with the addition of the optional RBC-1 remote level control (sold separately).

Specifications

• Frequency Response	7 Hz - 500 Hz (+0, -1dB)
  S/N Ratio, referred to highest rated power	>80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  S/N Ratio, referred to 1 W	>50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  Damping Factor @ 4 Ω	>1000 / 50 Hz
  Damping Factor @ 2 Ω	>500 / 50 Hz
  THD+N @ Rated Power	<1% @ 2 Ω per Ch.
  Input Voltage Range @ RCA Inputs	Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
  Min.Copper Power / Ground Wire Gauge	4 AWG wire
  Fuse Rating	80 A (AFS, AGU or MaxiFuse™)

Output Specifications

• @ 4 Ω	600 W RMS x 1
  @ 3 Ω	800 W RMS x 1
  @ 2 Ω	1000 W RMS x 1
  @ 1.5 Ω	N/A

Documentation

• JL Audio RD1000/1 Manual